KDC User Manual
Character dropping in web browser on iOS
When the KDC is connected to an iOS device in the HID iOS Bluetooth profile, scanning
into a web browser will sometimes prematurely execute the 'CR + LF' (enter) terminator
and result in a few characters dropping. The KDC will scan perfectly fine in native apps
such as Notes.
Workaround #1 - Using KTSync
If the KDC is an "i" model and has the MFi Bluetooth profile, KTSync can be used for keyboard
wedging, similar to HID. In this mode, the data transmission is much faster and more reliable.
KTSync must be open with the KDC connected and the KTSync Keyboard needs to be selected
before scanning. The HID character delay settings do not have any impact on transmission
times when connecting in MFi/SPP.
Workaround #2 - Using HID Transmission Delays
User can adjust initial delay and inter-character delay such as 1 second Initial Delay and 30
millisecond Inter-Character delay.
Scan the appropriate special bar codes on the back of the user manual.
•
Alternatively these settings can be set in KTSync by going to KDC Menu >
•
Bluetooth > and changing the Initial and Inter-Character Delays.
B
LUETOOTH
117