Code Options Menu ..........................28 Scan Options Menu ..........................28 Data Process Menu ..........................29 BT Config Menu - KDC200 / KDC200P / KDC300 ................31 BT Service - KDC200 / KDC200P / KDC300 ..................31 PDF417 Menu – KDC200P ........................32 System Menu ............................
Page 3
KDC200 User Manual 4. BLUETOOTH - KDC200/KDC200P/KDC300 ..................37 4.1 ConnectDevice ............................. 37 4.2 Auto Connect ............................37 4.3 Auto Power On ............................ 37 4.4 Auto Power Off ............................ 38 4.5 Beep Warning ............................38 4.6 PWR OFF Time ........................... 38 4.7 PowerOFF Msg ...........................
Page 4
B.2 Host Interface ............................. 82 B.3 Battery ..............................82 B.4 Memory .............................. 82 B.5 Programming ............................83 B.6 KDC200 vs. KDC200P ........................83 APPENDIX C - SPECIAL BARCODES ....................84 C.1 Set Symbologies ..........................84 C.2 Barcode Options ..........................87 C.3 Delete Last Scanned Barcode ......................
Page 5
KDC200 User Manual C.18 Lower Case Alphabet ........................111 C.19 Upper Case Alphabet ........................114 C.20 Control Character ........................... 117 C.21 Symbol Character .......................... 118 INDEX ..............................122...
KDC200 User Manual 1. INTRODUCTION Congratulations on purchasing KoamTac’s revolutionary barcode scanner and data collector. Lightweight and compact, with a user-friendly design and superior functionality, KoamTac’s KDC works in a variety of portable applications. Use it independently or as an accessory to your PC, PDA, or smartphone.
KDC. All KDC models are similar except for the KDC100 which includes an additional USB connector. KDC100 Barcode Reader and Data Collector Figure 2 - Characteristics of KDC100 KDC200 - KDC200P - KDC300 Barcode Reader and Data Collector (KDC200, KDC200P)
KDC200 User Manual 2. INSTALLATION 2.1 KoamTac Installation Wizard Windows XP WARNING: DO NOT CONNECT KDC TO USB PORT PRIOR TO INSTALLATION 1. Insert KoamTac Installation CD into your computer’s CD drive. 2. Click Start icon then My Computer icon. A listing of devices on your computer will display including the disk drive containing the KoamTac Installation CD.
Page 14
KDC200 User Manual Click Next icon in KTSync Confirm Installation window • Within a few minutes, installation of KTSync is complete. Click Close icon and wait for the Device Driver Installation Wizard to load.
Page 15
KDC200 User Manual Device Driver Installation Wizard Below are the screen images you will see during the installation of the KDC Device Driver. Click Next icon in Device Driver Installation Wizard window Click Continue Anyway icon in Software Installation Logo testing window...
Page 16
KDC200 User Manual Connect KDC to Computer Using the USB cable included with the KDC, follow the directions below. Connect the cable’s ultra mini USB connector to the KDC. Connect the cable’s Type A USB connector to your PC. Wait until your computer beeps and/or displays the message Found New Hardware.
Page 17
KDC200 User Manual Click Continue Anyway icon in Software Installation Logo testing window Click Finish icon in Found New Hardware Wizard window Verify COM Port Address User can verify installed COM Port in Device Manager...
KDC200 User Manual Vista and Windows 7 WARNING: DO NOT CONNECT KDC TO USB PORT PRIOR TO INSTALLATION 1. Insert KoamTac Installation CD into your computer’s CD drive. 2. Click Start icon then My Computer icon. A listing of devices on your computer will display including the disk drive containing the KoamTac Installation CD.
Page 19
KDC200 User Manual Click Next icon in KTSync Confirm Installation window Click Close icon in KTSync Installation Complete window and wait for Device Driver Installation Wizard Click Install this driver software anyway in Windows Security window...
Page 20
KDC200 User Manual Click Finish icon in Device Driver Installation Wizard window Connect KDC to Computer Using the USB cable included with the KDC, follow the directions below. Connect ultra mini USB connector to the KDC. Connect Type A USB connector to your PC.
KDC200 User Manual Windows Mobile 5.0+ WARNING: PLEASE CONNECT PDA TO PC PRIOR TO INSTALLATION 1. PC_Setup.exe creates Mobile_Setup.exe file under C:\Program Files\KoamTac\KTSync\Windows.Mobile directory 2. Execute Mobile_Setup.exe Select Windows Mobile version to install. Click Next icon.
KDC200 User Manual Click OK icon in Pending Application Install window Follow the instructions on PDA screen COM port Assignment User should assign a COM port for KDC before using pKTSync. User should pair KDC with PDA using PDA Bluetooth manager and assign a COM port for...
KDC200 User Manual 2.2 Manual Installation The KDC is equipped with one ultra mini USB port which is used to upload barcode data and to charge the KDC battery. Prior to using the KDC, KTSync software and KDC device driver must be installed on your computer.
KDC200 User Manual 3. OPERATING THE KDC 3.1 Getting Started Attach Neck Strap to KDC To prevent possible damage to the KDC, we strongly recommend wearing it around your neck by the included neck strap. Also, please don’t swing KDC by the neck strap because contact with another object may cause it to malfunction or become damaged.
KDC200 User Manual Configure KDC The KDC is designed to meet the data collection requirements of many different industries in a variety of dynamic situations. To perform well in these diverse environments, the KDC is designed to be configured easily and quickly. But, to perform at its maximum level, the KDC must be configured properly.
KDC200 User Manual 3.2 Basics Reading Barcodes Reading a barcode is simple. Point the KDC at a barcode and press the scan button. Be sure to point the scan engine at the barcode, not at your face, and make sure to position the light beam on the barcode.
KDC200 User Manual 3.3 KDC Menus Top Menu Sub Menu Note Top Menu Sub Menu Note Wedge Only Normal Default Wedge & Store KDC Mode Application Custom Application Wedge / Store Store Only View Data View/Delete View/Delete Data Save if Sent...
KDC200 User Manual KDC Mode Menu The KDC Mode Menu has two options – Normal and Application modes. Normal: This is the default mode which provides basic barcode scanning. In Normal mode ® barcode data can be manipulated directly through the KDC or using KTSync during the synchronization process.
KDC200 User Manual the KDC will read a barcode. Security Level is set from 1 up to 4. The higher security level means more reliable readings though some performance degradation is likely. For poor quality barcodes, we recommend increasing the security level. The default is 2.
Page 30
KDC200 User Manual Data Editor - KDC provides various data editing options. Prefix - Allows you to add a prefix to scanned data which can then be stored in KDC or wedged to the host. The Prefix format must be defined in the data format menu of KTSync.
KDC200 User Manual BT Config Menu - KDC200 / KDC200P / KDC300 The KDC supports Bluetooth Ver2.0+EDR. Before utilizing the advantages of Bluetooth functionality with the KDC, you should become familiar with Bluetooth connectivity and its impact on your host environment.
PDF417 Menu – KDC200P PDF417 Symbology The KDC200P has the same functionality as the KDC200 but it has an added option for supporting the PDF417 symbology. For maximum scanning performance for the PDF417 symbology, please become familiar with the following details.
KDC200 User Manual 3.4 LED Status LED Color Status Successful Reading Green USB is connected and battery is fully charged Low battery Orange USB is connected and battery is charging No reading Empty battery Table 5 - Explanation of LEDs 3.5 Empty Battery...
KDC100 - Connect to your PC directly using the swing out, Type A USB connector. See Figure 7. KDC200 / KDC200P / KDC300 - Connect to your PC using the included cable, attaching the ultra mini USB connector to your KDC and the standard, Type A connector to your PC’s USB port.
KDC200. Replacement batteries can be purchased from a KoamTac distributor. Batteries should be disposed properly. Step One - Place KDC200 face down on a firm surface. On the back, locate the small black screw in the middle of KDC. This screw secures the battery cover.
KDC200 User Manual 4. BLUETOOTH - KDC200/KDC200P/KDC300 The KDC200/300 support HID (Human Interface Device) and SPP (Serial Port Profile). KDC200i/300i support HID, SPP and MFI (Made for iPhone). They are compatible with the following Bluetooth stacks. BlueSoleil Broadcom (Widcomm) Microsoft Windows XP, Vista, 7, and Mobile5.0+...
3. Five short beeps if: “Beep Warning is ENABLED” “Auto Power Off is DISABLED” “KDC200/200P/300 is DISCONNECTED from HOST” “Bluetooth power is ON” 4.6 PWR OFF Time The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto Power Off is Enabled, the KDC powers off Bluetooth when the time duration specified in the PWR Off Time option is met and the KDC is NOT CONNECTED to the host.
KDC200 User Manual 4.10 Wakeup Nulls The KDC sends three leading Null bytes to wake up connected Bluetooth device. This feature can be disabled if connected Bluetooth device doesn’t require additional bytes to wake up. 4.11 HID Toggle User can connect and disconnect Bluetooth connection with the host device by pressing Up and Down key if...
“Connected” message. If this occurs, a Bluetooth connection is established. 4.14 Discovering KDC200/300 start to search neighboring Bluetooth device if this Discovering menu is executed. It would take about 30 seconds to finish search and lists available neighboring Bluetooth devices. Use may enter corresponding Bluetooth MAC address in KTSync Bluetooth menu instead of searching neighborhood Bluetooth devices.
Page 41
KDC200 User Manual Menu. [Note] There could be an interoperability issue depends on corresponding device Bluetooth stack. Master Bluetooth device may request to follow master Bluetooth device security procedure if KDC tries to connect to the master Bluetooth device.
KDC200 User Manual 5. SYNCHRONIZATION ® When barcode data is collected, it must be uploaded to your application. KTSync , which is bundled with the KDC, is software that allows barcode data to be uploaded to any PC, PDA, or smartphone running Windows XP, Vista, Windows 7, or Mobile 5.0+.
KDC200 User Manual Bluetooth: This option is not available on KDC100. Exit: This option ends the KTSync program. You must re-run KTSync before you can synchronize data on the KDC. Figure 9 – File Menu Settings Menu Synchronization: Select Synchronize options.
KDC200 User Manual Application Menu Generation: Create user application or download predefined application. DB Lookup: Allow user download DB into KDC and display barcode description field Master/Slave: User to define a master barcode for comparison with one or more slave barcodes Pick/BIN: User define Pick ID and the barcode symbology for comparison with a defined Bin Inventory: User can count inventories.
KDC200 User Manual 5.2 File Menu Connect to KDC The KDC connects to a COM port automatically when connected to your PC’s USB port. You can ® manually assign the KDC COM port using KTSync Connection submenu under File menu if needed.
KDC200 User Manual Bluetooth This menu option allows you to register up to ten Bluetooth devices including their MAC address, PIN #, and optional prefixes or suffixes. This option enables direct Bluetooth connection between KDC and other Bluetooth devices such as Bluetooth printer. User should choose Bluetooth device to be connected in “Connect to”...
KDC200 User Manual 5.3 Synchronization Settings ® KTSync provides several synchronization options for synchronizing data from your KDC to host devices such as your PC, PDA, or smartphone running Windows XP, Vista, Windows 7, or Mobile 5.0+. ® Figure 15 - KTSync...
KDC200 User Manual Select from Current Running Application – This option allows you to select a currently running application for data synchronization. Note: • Data synchronization begins immediately if Automatically After Connection is selected. If not selected, data synchronization is started manually by the user.
KDC200 User Manual KDC is connected to the host. IMPORTANT: Remember to configure all options properly before selecting this option. Data synchronization can be done manually by clicking the synchronize icon if this option is not selected. Beep while Synchronization You can enable or disable the beep tone during the synchronization process.
KDC200 User Manual Synchronization Options Synchronize KDC Time with PC Time when Connected This option enables you to synchronize the KDC date and time with the host date and time. Synchronization of date and time occurs after the data is uploaded to the host device.
KDC200 User Manual 5.4 Barcode & KDC Settings ® KTSync allows you to configure the KDC Scan Options and Barcode Settings. The configurations ® options for the KDC using KTSync are similar to the Set Barcodes, Code Options, Data Editing and Scan Options on the KDC Menu.
KDC200 User Manual Select Symbologies and Symbology Options The process for scanning and reading barcodes is delicate and complicated. Your KDC, though equipped with a high performance scan engine, if configured incorrectly, may not perform at its peak performance level. To ensure its high performance, the KDC comes configured to optimize its scan engine technology.
KDC200 User Manual 5.5 Others Settings Others option under the Settings menu allows you to select four additional settings. • Ask Confirmation before Trying Auto Connection prevents unintentional launch of KTSync. • Ask Confirmation before Starting Auto Synchronization prevents unintentional synchronization of data.
KDC200 User Manual 5.6 Mobile pKTSync For Mobile Device Use Only pKTSync provides limited functionality for Pocket PC 2003 and Mobile 5.0+ users. 1. Synchronization - Provides data upload functionality to your applications. 2. Keyboard Emulator - Allows scanned data to upload directly into your application as if the data were being entered manually on a keyboard.
[NOTE] aKTSync only supports Android devices with 2.1+ OS version and compatible with BluetoothChat application. 1. Pairing Select “SPP” Bluetooth profile from KDC ConnectDevice submenu in BT Config menu. Search KDC200/200i/300/300i from Android and pairing two devices. KDC200/200i/300/300i PIN code is “0000” 2. Connection Click “Connect” icon in aKTSync Android would list up paired Bluetooth devices and user should select the target KDC.
KDC200 User Manual 5.8 iPad/iPhone/iPod touch KTSync The KTSync for iPad/iPhone/iPod touch provides limited functionality of PC KTSync for iPad, iPhone and iPod users. User can download KTSync for iPad/iPhone/iPod touch from AppStore. KDCi and iPad/iPhone/iPod Pairing/Connection using iPhone Bluetooth Profile Select “iPhone”...
Select “HID” Bluetooth profile from KDC ConnectDevice submenu in BT Config menu. Search KDC200/200i/300/300i from iPad and iPhone(iOS 4.0+) KDC200/200i/300/300i would ask to enter the number of PIN code. iPad requires to enter 6 digits and iPhone requires to enter 4 digits Please press scan button to connect to iPad as default 6 digits PIN code.
The bKTSync provides limited functionality of PC KTSync for Blackberry users. Pairing KDC using Blackberry Bluetooth Option Select “SPP” Bluetooth profile from KDC ConnectDevice submenu in BT Config menu. Search KDC200/200i/300/300i from Blackberry Bluetooth Options and pairing two devices. KDC200/200i/300/300i PIN code is “0000” Launch KTSync...
KDC200 User Manual 6. APPLICATION GENERATION When you select Application menu from the KTSync, you can choose from the following five Applications – Generation, DB Lookup, Master/Slave, Pick/BIN, and Inventory. User can also download saved programs using Import & Download option.
KDC200 User Manual 6.1 Application Generation KDC Application Generation tool is a robust feature that allows you to create custom applications for collecting and managing barcode data. To create a custom application, select the Generation submenu ® from the Application menu in KTSync Figure 24 –...
KDC200 User Manual Starting quantity Enter a predefined start quantity for each scanned barcode. The start quantity can be defined from 1 to 128 and is modifiable using up or down side key. Waiting to scan Enter the number of seconds the KDC pauses before the user prompts display. During this timeout period, the user can modify the quantity.
Page 62
KDC200 User Manual Barcode Type This field allows you to select the type of barcodes the KDC will collect. When you click on the box, Select Symbols is enabled. A listing of the symbologies supported by the KDC displays. To select a barcode symbology, click on the box associated with the symbology.
KDC200 User Manual Previous Scanned Data – This option allows you to compare the scanned barcode with previously scanned barcode and treat it as non-compliant data if scanned same barcode twice. All Stored Data – This option allows you to compare the scanned barcode with stored barcode data and treat it as non-compliant data if the same barcode already scanned and stored.
KDC200 User Manual 6.2 Predefined Applications KTSync provides four Predefined Applications – Master/Slave, Pick/Bin, DB Lookup and Inventory. Master/Slave Master/Slave predefined application allows you to define a master barcode for comparison with one or more slave barcodes. The predefined application can be run once or continuously and within either setting, you can define a substring for comparison of master and slave barcodes.
KDC200 User Manual Pick/Bin The Pick/Bin predefined application is a special version of the Master/Slave predefined application. The Pick/Bin application allows you to define Pick ID and the barcode symbology for comparison with a defined Bin. Number of ID and Symbology Define Pick ID characters from 1 to 32 and the barcode symbology.
KDC200 User Manual Exit to KDC Menu <Up>+<Down> User ID Scan User ID Valid User ID Defined Side Key Please Store User ID scan Pick data User Input Scan button Valid Barcode Please scan Bin data Ignore Scanned Pick Label...
KDC200 User Manual DB Lookup Application The DB Lookup application allows you to download a database to the KDC which it can then utilize for advanced AUTO-ID applications like displaying additional data after scanning a barcode. For example, using our DB Lookup application, you could download a product database including information like description, price, and stock quantity.
KDC200 User Manual Inventory Application The Inventory application allows you to count inventories by scanning inventory barcodes. This application will increase inventory item count if the same item is scanned. User can also download an inventory database to the KDC. KDC would display inventory description after scanning a barcode if inventory DB is downloaded.
KDC200 User Manual 7. Troubleshooting PROBLEM CAUSE SOLUTION Charge battery by connecting KDC to your PC using the Dead battery included cable KDC not working Hardware failure Contact distributor for technical support Bad battery Replace battery – Contact Local Distributor KDC not charging USB port doesn’t supply proper current to KDC - Charge KDC...
KDC200 User Manual 8. Warranty LIMITED WARRANTY AND DISCLAIMERS BY OPENING THE PACKAGE OF THIS PRODUCT YOU AGREE TO BECOME BOUND BY THE LIABILITY AND WARRANTY CONDITIONS AS DESCRIBED BELOW. UNDER ALL CIRCUMSTANCES THIS MANUAL SHOULD BE READ ATTENTIVELY, BEFORE INSTALLING AND OR USNG THE PRODUCT.
KDC200 User Manual 9. CONTACT INFORMATION CORPORATE HEADQUARTERS 116 Village Boulevard, Suite 200, USA Princeton, NJ 08540 PH: 609-734-4335 FAX: 609-228-4373 email: support@koamtac.com For more information, visit our website - www.koamtac.com...
KDC200 User Manual APPENDIX A - Barcode & Scan Options The process for scanning and reading barcodes is delicate and complicated. Your KDC, though equipped with a high performance scan engine, if configured incorrectly, may not perform at its peak performance level.
KDC200 User Manual and Bookland EAN are both enabled, Bookland EAN takes precedence. Bookland EAN does not have any options. The Bookland EAN barcode does not contain any groupings – that is, there are no hyphens or separators. Thus, the ISBN 957-630-239-0 is transmitted as 9576302390.
KDC200 User Manual A.2 Code Options The KDC supports the following barcode options: Transmission of start and stop characters Reverse direction Symbology conversion Verification of optional check character Transmission of check digit Transmission of Start and Stop Characters For Codabar symbols you can choose not to transmit the start and stop symbols, the NOTIS Editing. By default, they are transmitted.
KDC200 User Manual Verification of Optional “Check Digit” Code39 and Interleave 2 of 5 have an optional check digit, which, by default, is not verified. Their verification can be enabled by selecting the option VerifyCheckDigit to true or you can enable the verification for individual symbologies.
KDC200 User Manual Resolution of Inconsistencies Three types of inconsistencies could arise in the assignment of symbology options. The decoder has pre- defined strategies to resolve these inconsistencies: If UPCE_as_EAN13 is true, then UPCE_as_UPCA is ignored. If symbology conversion is selected but the target symbology is not enabled, then the decoder still outputs the symbol in the target symbology.
KDC200 User Manual A.3 Miscellaneous Barcode Information Height of a Linear Barcode Industry standards suggest a height of either 6.5mm or 15% of the symbol length, whichever is greater. Symbols of less than recommended heights may cause recognition problems. Check Characters Yes, we recommend the use of check-characters in barcodes.
KDC200 User Manual Equation to Determining Potential Number of Stored Barcodes The number of barcodes that can be stored in the KDC memory depends on the size of the barcodes. Example: If only UPCA barcodes are scanned and the check digit is not transmitted, then each barcode takes up 11 (barcode data) + 2 (added bytes) + 2 (length and type) + 4 (time stamp) = 19 bytes.
Appendix B – FAQ B.1 Symbology Q: What barcode symbologies are supported by the KDC200? A: The KDC200 supports most major 1D barcode symbologies. Below is a list of the1D symbologies supported by the KDC200. KDC300 KDC100 / KDC 200 / KDC200P...
A: The battery on the KDC200 can be charged at least 300 times before it needs to be replaced. Q: How long does it take to charge the KDC200? A: It takes about 2 hours to fully charge the KDC200 from an empty battery status to a fully charged status.
Q: What are the differences between the KDC200 and the KDC200P? A: The only difference between these two models of KDC is that the KDC200P supports PDF417, a 2D symbology which is not supported by the KDC200. All other features of the KDC200 are included in the KDC200P.
KDC200 User Manual C.2 Barcode Options Codabar - do NOT transmit start/stop Codabar - transmit start/stop Convert UPCE to UPCA Do NOT convert UPCE to UPCA Convert EAN8 to EAN13 Do NOT convert EAN8 to EAN13 Convert UPCE to EAN13...
Page 88
KDC200 User Manual VerifyCheckDigit Do NOT VerifyCheckDigit Verify check digit for I2of5 Do NOT verify check digit for I2of5 Verify check digit for Code39 Do NOT verify check digit for Code39 Return check digit for I2of5 Do NOT return check digit for I2of5...
KDC200 User Manual Return check digit for UPCA Do NOT return check digit for UPCA Return check digit for EAN8 Do NOT return check digit for EAN8 Return check digit for EAN13 Do NOT return check digit for EAN13 C.3 Delete Last Scanned Barcode...
KDC200 User Manual C.9 Data Process - Data Format - Handshake Data format - Barcode only Data format - Packet data Enable Handshake Disable Handshake Enable CheckDuplicate Disable CheckDuplicate...
KDC200 User Manual C.11 Bluetooth Enable Bluetooth Power Disable Bluetooth Power Enter Pairing Mode Enable Auto Connect Disable Auto Connect Enable Auto Power Off Disable Auto Power Off Enable Auto Power On Disable Auto Power On Enable Beep Warning Disable Beep Warning...
Page 100
KDC200 User Manual Enable PowerOff Msg Disable PowerOff Msg BT MAC Address BT FW Version Enable Wakeup Nulls Disable Wakeup Nulls Enable Scrolling Disable Scrolling Discovering Connecting To Discovering Enable Discovering Disable ConnectToLast...
KDC200 User Manual C.12 Bluetooth Auto Power On Time Auto Power On Time Disabled Auto Power On Time 1sec Auto Power On Time 2sec Auto Power On Time 3sec Auto Power On Time 4sec Auto Power On Time 5sec Auto Power On Time 6sec...
Page 102
KDC200 User Manual Auto Power On Time 10sec...
KDC200 User Manual C.14 System Memory Status Reset Memory Date/Time Battery Version Button Lock Button Unlock Enable Auto Menu Exit Disable Auto Menu Exit...
Page 107
KDC200 User Manual Enable Port Status Disable Port Status Time & Battery Type & Time Type & Battery Memory Status Enable Scrolling Disable Scrolling Factory Default...
Page 121
KDC200 User Manual Start-String Stop-String Note: • You can compose a string up to 16 characters. • A string would be composed by scanning the “Start-String”, number/alphabet/special characters, and “Stop-String” special barcodes. • The KDC will abort string composition if you do not scan “Stop-String”...