Replace Battery - KoamTac KDC20 Reference Manual

Kdc series. barcode reader and data collector
Hide thumbs Also See for KDC20:
Table of Contents

Advertisement

KDC User Manual
3.10

Replace Battery

Each KDC comes with a rechargeable, Lithium-polymer (KDC20/100/200) or Lithium-ion
(KDC30/250/270/280/300/350/400/470/500) battery. The battery may be recharged from any
USB port or KDC charging cradle, and may be recharged about 300 times before it needs to be
replaced. KOAMTAC recommends replacing the battery annually, as a declining battery will
cause noticeable performance degradation in the KDC. Replacement batteries may be
purchased from a KDC reseller. Batteries should be disposed of properly as according to the
WEEE regulation. The steps for replacing a battery are as follows.
1
Disassemble the KDC back cover by unscrewing the middle screw.
.
2.
Remove the old battery and replace with a new battery.
3.
Reassemble the back cover.
1
2
3
KDC20/30/100/200/250/270/280/300/350-R1
B
LUETOOTH
Unscrew the screw indicated by
the arrow.
Remove the battery cover by
pulling it down.
Remove the battery.
Pull out the 2pin connecter
gently.
106

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents