Kdc Beep Sounds - KoamTac KDC20 Reference Manual

KDC User Manual
3.4

KDC Beep Sounds

The KDC beep sound can be change using a special bar code, using the KDC menu, or using
KTSync.
The beep sound can be turned off entirely by disabling the Beep Sound.
•
KDC Menu > System Config > Beep Alert > Beep Sound > Disable > Save & Exit.
Alternatively, beeps can be toggled individually for the following:
•
Beep on powering up
•
Beep on connection to host device
•
Beep on scanning (success & failure)
•
(MSR) Beep on card swipe
•
(RFID) Beep on RFID tag reading
The beep pitch can be toggled using the Beep Volume(Tone) settings.
• Low
Set to
• High
Set to
For the KDC350 and KDC500, the Key Tone refers to the sound from a keypad press.
•
KDC350: Set to
•
KDC500: Set to
by default, can be changed to
by default for KDC500 only, can be set to
Disabled
by default, can be changed to
High
by default, can be changed to
Low, High
.
Low, High
Disabled, Low, Medium, High
Disabled, Low, Medium, High
B
LUETOOTH
.
.
.
60