Msr Config Menu - Kdc415/425/430/500 - KoamTac KDC20 Reference Manual

KDC User Manual
Auto Connect
Enable/Disable KDC to reconnect to AP & Server when it detects disconnection from
⚫
AP and Server.
Send Stored
⚫ Enable/Disable KDC to send stored data when sending a new read data.
MSR Config Menu – KDC415/425/430/500
Power(KDC500 only)
Turning MSR(Magnetic-Stripe Card Reader) on or off
⚫
Options: Enabled/Disabled
⚫
Data Format(KDC415/425/430 only)
Enables/Disables whether KDC415/425/430 sends with packet data or not.
⚫
Options: Enabled/Disabled
⚫
Use Track
The user may select which track(1/2/3) data to read from the MS Card.
Track 1 : Enabled/Disabled
⚫
Track 2 : Enabled/Disabled
⚫
Track 3 : Enabled/Disabled
⚫
Null Check(KDC500 only)
The user may select which track(1/2/3) data should not be null. When this option is enabled for a
Track and the read data is null, MS Card read fail occurs.
Track 1 : Enabled/Disabled
⚫
Track 2 : Enabled/Disabled
⚫
⚫ Track 3 : Enabled/Disabled
Beep On Error
When this option is enabled, KDC makes a beep sound when it fails to read a MS card.
Encrypt MSR Data(KDC415/425/430 only)
If enabled, KDC415/425/430 sends MSR data with AES encrypted.
⚫
Options: Enabled/Disabled
⚫
AES Key length(KDC415/425/430 only)
B
LUETOOTH
96