Power Connector Cable - HP Pavilion x360 Maintenance And Service Manual

Power connector cable

NOTE: The power connector cable spare part kit does not include the power connector cable bracket. The
power connector cable bracket is available using spare part number 924421-001.
Description
Power connector cable (does not include bracket)
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
the following components:
a. Battery (see
b. Speakers (see
c. System board (see
Remove the power connector cable:
1. Lift the right side of the power connector cable bracket (1) to release the bracket from
the power connector.
2. Remove the power connector cable bracket (2).
3. Remove the power connector cable (3).
52 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page 34)
Speakers on page 38)
System board on page
27), and then remove
42)
Spare part number
808155-018