System Board - HP Pavilion x360 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include a processor and replacement thermal material.
Description
Equipped with an Intel Core i3-7100U 2.40 GHz dual core processor (2133 MHz FSB, 3.0 GB L3 cache, 15 W)
and the Windows 10 operating system
Equipped with an Intel Core i3-7100U 2.40 GHz dual core processor (2133 MHz FSB, 3.0 GB L3 cache, 15 W)
and a non-Windows operating system
Equipped with an Intel Pentium 4200U 1.10 GHz (SC turbo up to 2.50 GHz) quad core processor (2.0 GB L2
cache, 1866 MHz FSB, 6 W) and the Windows 10 operating system
Equipped with an Intel Pentium 4200U 1.10 GHz (SC turbo up to 2.50 GHz) quad core processor (2.0 GB L2
cache, 1866 MHz FSB, 6 W) and a non-Windows operating system
Equipped with an Intel Celeron N3350 1.10 GHz (SC turbo up to 2.40 GHz) dual core processor (2.0 GB L2
cache, 1866 MHz FSB, 6 W) and the Windows 10 operating system
Equipped with an Intel Celeron N3350 1.10 GHz (SC turbo up to 2.40 GHz) dual core processor (2.0 GB L2
cache, 1866 MHz FSB, 6 W) and a non-Windows operating system
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
6. Remove the speakers (see
When replacing the system board, be sure to remove the following components from the defective system
board and install them on the replacement system board:
● WLAN module (see
Heat sink (see
●
● Memory modules (see
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Power button board ZIF connector cable
(2) Display panel ZIF connector cable
(3) WLAN antenna cables
NOTE:
black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal.
(4) Speaker cable
42 Chapter 5 Removal and replacement procedures
Battery on page
Speakers on page
WLAN module on page
Heat sink on page 46)
Memory module on page
The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/
Keyboard/top cover on page
34).
38).
45)
50)
Spare part number
923810-601
923810-001
923811-601
923811-001
923809-601
923809-001
27).