Speakers - HP Pavilion x360 Maintenance And Service Manual

Speakers

Description
Speakers (includes cables and 4 rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
Remove the speakers:
1. Release the ZIF connector (1) to which the hard drive cable is connected, and then disconnect the hard
drive cable from the system board.
2. Detach the hard drive cable (2) from the system board. (The hard drive cable is attached to the system
board with double-sided adhesive.)
3. Disconnect the speaker cable (3) from the system board.
4. Release the speaker cables (4) from the retention clips and routing channel built into the base enclosure.
5. Remove the three Phillips PM2.0×5.5 broad head shoulder screws (5) and Phillips PM2.0×6.2 broad head
shoulder screw (6) that secure the speakers to the base enclosure.
38 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page 34).
Spare part number
924437-001
27).