Display Assembly - HP Pavilion x360 Maintenance And Service Manual

Reverse this procedure to install the power connector cable.

Display assembly

NOTE: The display assembly is spared at the subcomponent level. For display assembly spare part information,
see the individual removal subsections.
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
the following components:
a. Battery (see
b. Speakers (see
c. System board (see
Remove the display assembly:
1. Remove the six Phillips PM2.5×5.7 screws (1) that secure the display assembly to the base enclosure.
2. Remove the display assembly (2).
3. If it is necessary to replace the display panel assembly or any of the display assembly subcomponents:
NOTE:
from the base enclosure.
Battery on page
Speakers on page
System board on page
The display panel assembly can be removed and replaced without removing the display assembly
Keyboard/top cover on page
34)
38)
42)
27), and then remove
Component replacement procedures 53