ABB PROFIBUS FEX100-DP User Manual page 32

WaterMaster
Electromagnetic flowmeter
Abs. Idx /
Variable Name / Brief Description
Rel. Idx
UNUSED
44 / 28
Unused parameter.
UNUSED
45 / 29
Unused parameter.
UNUSED
46 / 30
Unused parameter.
POS_D
47 / 31
The current position of the valve (discrete).
SETP_DEVIATION
48 / 32
Difference between set point signal and feedback position in % travel span (between
OPEN and CLOSE position).
CHECK_BACK
49 / 33
Detailed information of the device, bitwise coded. More than one message possible at
once.
CHECK_BACK_MASK
50 / 34
Definition of supported CHECK_BACK information bits.
SIMULATE
51 / 35 For commissioning and maintenance reasons, it is possible to simulate the READBACK
by defining the value and the status. The Transducer Block and the AO-FB are
disconnected when the SIMULATE parameter is in use.
INCREASE_CLOSE
52 / 36
Direction of positioner in mode RCas and Auto.
OUT
53 / 37
The process variable of the analog output block in engineering units in AUTO and RCas
mode and is the value specified by the operator/engineer in Man and LO mode.
OUT_SCALE
Scale of the Process Variable.
54 / 38
The Function Block parameter OUT_SCALE contains the values of the lower limit and
upper limit effective range, the code number of the engineering unit of Process Variable
and the number of digits on the right hand side of the decimal point.
Table 2.9 Slot 7 – Analog Output 1 – Display Value (Continued)
30
Access /
Data Type Size Store Usage /
Transport
– – –
– – –
– – –
102 2 D r / C / a
Float 4 D r / C / a
OctetString 3 D r / C / a
OctetString 3 Cst r / C / a
DS-50 6 S r,w / C / a
Unsigned 8 1 S r,w / C / a
101 5 D r,w / C / a
DS-36 11 S r,w / C / a
2 Parameter Tables
Default
– –
– –
– –
–
–
–
–
–
–
–
–
IM/WMPBST–EN Rev. B