Table of Contents
Advertisement
6. Return documents to the feeder in their original order.
7. Press and quickly release the Start/Stop button to reprocess
documents. Continue with document processing.
Clearing the Track
Follow these steps when documents are jammed or repeatedly fail to travel to
pockets. First, attempt to start reprocessing by following the steps in
"Recovering from Processing Problems" earlier in this section.
1. Remove jammed documents by grasping and pulling straight up with
some force. Do not pull documents backwards.
2. Inspect the track for obstructions such as pieces of paper, paper clips, or
staples.
3. Attempt to remove obstructions using the Source NDP Track Clearing
Card.
a. Remove the Track Clearing Card from its storage location in the base
of the unit as shown in Figure 6-1.
Figure 6–1. Source NDP Track Clearing Card Storage
b. Insert the card into the feeder with the arrow pointing into the track.
4326 6295–002
Recovery from Problem Conditions
6–3
Advertisement
Table of Contents
