Table of Contents
Advertisement
9. With the Ready status light solid green press and quickly release the
Start/Stop button to feed documents. Refer to Figure 3-22.
Removing Documents from Pockets
Processed documents are sent to one of two pockets. Remove the
documents from the pocket or pockets, and follow the work flow procedures
practiced at your site to handle them after processing. For best results, follow
these practices:
•
Remove documents when a pocket is nearly full. Jams occur when
pockets are too full.
•
Occasionally check that endorsements are clearly printed.
•
Be sure that short or long check limiters are installed based on the length
of the longest processed documents. Check limiters help to minimize
pocketing problems.
•
Occasionally check with your supervisor or site administrator to ensure
that images are properly captured and that the quality is good.
•
When running an application that selects a pocket, occasionally thumb
through pocketed documents to check that pocketing was done correctly.
4326 6295–002
Source NDP Operation and Document Processing
Figure 3–22. Pressing the Start/Stop Button
3–17
Advertisement
Table of Contents
