Table of Contents
Advertisement
Replacing the Inkjet Print Cartridge
Replace the Inkjet print cartridge as follows:
Remove and insert the cartridge with care. The sharp lower edge of the
cartridge can cause damage to the electrical contacts in the cartridge
holder. Watch that the bottom edge of the cartridge does not catch on
or scrape the electrical contact in the holder. Hold the cartridge level
during removal and replacement. Ensure the cartridge is level and fully
seated in the holder before closing the blue latch.
1. Remove an Inkjet print cartridge from its shipping container. Follow the
instructions enclosed with the cartridge to prime the cartridge.
2. Pull back the blue retaining ring (shaded in Figure 5-20) to its open
position.
Figure 5–20. Opening the Inkjet Head Retaining Ring
4326 6295–002
Removal and Replacement of Source NDP Components
Caution
5–15
Advertisement
Table of Contents
