Clearing Jams - Unisys My VisionX Operator's Manual

4.3 Clearing Jams

When a jam occurs, the paper path must
be cleared. To do this, first remove all the
documents from the exit pocket and then
free the track by pressing Eject in your application.
In case of unsuccessful operation, apply
the following suggestions:
1. Extract the jammed document simply by
pulling it out with your fingers (see Fig.22).
2. If the document does not pull out , lift the inner
cover at the point indicated by the ribbed
surface as shown in Fig.23.
OPERATOR MANUAL
Page 27
Fig.22
Fig.23
Getting Started