Table of Contents
Advertisement
Source NDP Operation and Document Processing
Start/Stop Button
The Start/Stop button is located on the right-hand side of the unit near the
feeder. Figure 3-2 shows pressing the Start/Stop button with top-right cover
in place. The cover is on during normal operation.
Figure 3–2. Pressing the Start/Stop Button with the Cover in Place
Figure 3-3 shows pressing the Start/Stop button with the cover removed. The
cover is off during cleaning and some recovery tasks.
Figure 3–3. Pressing the Start/Stop Button with the Cover Removed
Using the Start/Stop Button to Process Documents
Press and quickly release the Start/Stop button to start or stop
processing documents when the Ready status light is solid green. Use the
same action when the Ready light is solid yellow after a track stop to restart
document processing.
4326 6295–002
3–3
Advertisement
Table of Contents
