Source Ndp Features; Documentation; Ordering Supplies And Replacement Items - Unisys e-action Source NDP Installation And Operation Manual

Source capture network document processor
Table of Contents

Advertisement

Source NDP Features

The Source NDP handles 30 documents per minute with automatic feeding. It
offers the following features:
Autofeeder with capacity for 100 documents
CMC7 and E13B MICR readers
Full-height OCR reader
Front and rear image at 240 dots per inch
CCITT Group 4 (black and white) or JPEG (gray-scale) images
Inkjet endorser with three adjustable heights
Two pockets with capacity for 100 documents each
Refer to Appendix A for Source NDP specifications.

Documentation

This guide describes the Source NDP and gives instructions for installation,
operation, replacing consumable supplies, cleaning, removing and replacing
components, and recovering from problems. Operators and site supervisors
are the intended audiences for this guide.
Capture Network Document Processor Reference Card is shipped with the
unit.
Source NDP documents are available from the Unisys Bookstore. You can
also place orders through your local marketing representative or distributor.
The Installation and Operation Guide is also available as an electronic file in
PDF format on the Source NDP CD-ROM that is shipped with the unit.
Other documentation for system installers and administrators is on the
Source NDP CD-ROM.

Ordering Supplies and Replacement Items

Source NDP Starter Kits, supplies, and replacement items are available from
Unisys Direct. Power cords are available through your local Unisys sales
office. Refer to Appendix C for more information.
4326 6295–002
Source NDP Networked Document Processor
The Unisys e-@ction Source
1–3

Advertisement

Table of Contents
loading

Table of Contents