Table of Contents
Advertisement
Removal and Replacement of Source NDP Components
Unit Covers
The Source NDP covers provide access for cleaning the unit, clearing the
track, and replacing consumable or replacement items. Refer to Figure 1-2 for
the location of these covers. Replacement covers are available from Unisys
Direct.
Be sure the document processor is connected to an AC power source
before removing the covers. Otherwise, electrostatic discharge may
damage the unit.
Top-Left Cover
The top-left cover is located on the pocket side of the unit. To remove, grasp
on either side and pull up on the cover. Refer to Figure 5-1.
5–2
Caution
Figure 5–1. Removing the Top-Left Cover
4326 6295–002
Advertisement
Table of Contents
