Desktop Installation; Guiding The Ac Adapter Cable - Delta R4E User Manual

Installation Method

2.2.Desktop Installation

● Desktop installation method
① Insert the Wall Surface / Desktop Mounting Plate in the insertion slot for anchoring the Desktop
Mounting Plate at the lower section of the main unit, being careful about the direction the plate
is facing.
② Verify to ensure that there is no gap between the Wall Surface / Desktop Mounting Plate and
Part A at the bottom of the main unit, as shown in the figure to the right.

2.3. Guiding the AC Adapter Cable

There are two wiring accesses in the upper and lower sections
on the reverse side of the Power Monitor.
According to the prescribed wiring method, remove the tab
on the wiring access, and guide the cable through.
① Remove the tab on the wiring access, using a pair of pliers or the like.
(Remove burr with a pair of pliers to ensure that the cables are not scratched.)
② Guide through the cables.
①
①
①
■ When wiring from bottom
20
Ａ
②
■ When wiring from top
②
②