4-5-2. Communication Trouble
d-2.
Camera operations are not available.
d-2
Are the communication
method and the baud
rate correctly set for the
camera ?
Yes
Is the cable between
the camera and this unit
correctly connected ?
Yes
Is the FFC between
the MD and SW boards
correctly connected ?
Yes
No
Is the BRC-300/P used ?
Yes
Have you exited the
menu on the monitor ?
Yes
Is the camera address
of the BRC-300/P
automatically set ?
Yes
Go to 3
(Next page)
4-24
No
No
No
No
No
Does the CAMERA
No
button corresponding
to the camera address
of the BRC-300/P
light up?
Yes
FFC: Flexible flat cable
Set correctly the
communication method
(RS-232C/RS-422) and the
baud rate (38400/9600) for
the camera, and restart the
system.
Connect correctly the cable
between the camera and
this unit.
Connect correctly the FFC
between the MD and SW
boards.
Exit the menu, and perform
operation checks.
n
The pan/tilt operations are
not available while the
menu is being displayed.
Press the CAMERA button
corresponding to the
camera address of the
BRC-300/P to light it up,
and perform operation
checks.
BRC-300/300P
BRU-300/300P