Sw-1205 Board - Sony BRC-300 Service Manual

2-6-2. SW-1205 Board

Removing
1. Remove the outer (upper) assembly.
(Refer to steps 1 and 2 in Section 1-5-1.)
2. Turn over the outer (upper) assembly.
3. Remove the two screws, and remove the SW-1205
board.
n
Be careful not to lose the buttons on the outer (upper)
assembly.
4. Remove the three knobs.
SW-1205 board
Knobs
Outer (upper) assembly
Installation
5. Reinstall the SW-1205 board in the reverse order from
steps 2 to 4.
6. Reattach the outer (upper) assembly.
(Refer to step 3 in Section 1-5-1.)
2-26
+B3 x 5
BRC-300/300P
BRU-300/300P