Error, Information, And Warning Alert Settings - Intermec PC23 User Manual

Chapter A —

Error, Information, and Warning Alert Settings

134
This section describes error, information, and warning alerts and
settings. To view these settings:
• From the printer home page, click the Configure tab > Alerts >
Error, Warning, or Information.
These alert settings cannot be configured from the printer Main Menu.
Alert settings apply to each of the error, information, or warning alerts
and are configured individually by alert.
Alert Setting Descriptions
Setting Description
Status Determines if an alert is sent out for a specific printer event.
Delay Repeat Sets how often the alert is sent out for a specific printer
event. Range is 1 to 65535.
Delay Unit Selects the unit of measure that determines how often the
alert is sent out.
Message Sets the message that is sent out with each alert for a specific
printer event.
Error Alert Default Settings
Error Alert Status
Out of Media Enable
Out of Ribbon Enable
Printer in Disable
Pause Mode
Printer in Disable
Menu Mode
Application Disable
Break
RFID Not Disable
Installed
Delay
Repeat Delay Unit
1 Occurrences
1 Occurrences
1 Occurrences
1 Occurrences
1 Occurrences
1 Occurrences
PC23 and PC43 Desktop Printer User Manual
Message
Error - Out of media
Error - Out of ribbon
Printer in pause mode
Printer in menu mode
Error - Application
Break
Error -RFID not
installed