About Alerts - Intermec PC23 User Manual

What do you clean
the roller with?

About Alerts

PC23 and PC43 Desktop Printer User Manual
For a thermal transfer printer:
6 Clean the roller with <SOME SUBSTANCE TO BE DETERMINED
LATER>.
7 Reverse Steps 4 and 5 to install the roller.
8 Press the latches into the printer until they snap into place.
9 Replace the media in the printer.
10 Close the printer lid until it snaps shut.
To help maintain the printer, you can configure the printer to send
alert messages when certain conditions occur. For example, the printer
can send a message when the odometer reaches a certain value, or if the
printhead is lifted during printing.
There are three types of alerts:
• Error alerts
• Information alerts
• Warning alerts
You configure alert settings in the printer home page. Alert messages
can be sent to an email address, an SNMP trap, or both. You can enable
or disable each type of alert, set the number of times the alert is
repeated, set the unit of measure that determines how often the alert is
sent, and change the default text message for the alert.
Chapter 6 —
111