System Maintenance Alert Settings - Intermec PM23c User Manual

System Maintenance Alert Settings

PM23c, PM43, and PM43c Mid-Range Printer User Manual
System Network Services (Continued)
Service Description
SmartSystems Determines if the printer can be managed by
Intermec SmartSystems Foundation.
SNMP Determines if the printer can use SNMP.
LPR Determines if the printer can use the line printer
server (LPR) daemon.
IKEv2 Determines if the printer can use IKEv2.
SSH Determines if the printer can use Secure Socket
Handling (SSH).
Telnet Determines if the printer can use Telnet.
This section describes the system maintenance alert settings, such as
the odometer distance. To view these settings:
• From the printer Main Menu, select Settings > System Settings >
Maintenance Alerts.
• From the printer web page, click the Configure tab, System
Settings > Maintenance Alerts.
System Maintenance Alert Settings
Setting
Odometer (User
Resettable)
Odometer (Printer)
Description
Sets the length of media (in meters) that the
printer prints before the Odometer (User
Resettable) alert is sent, if this alert is
configured. Unit of measurement is defined
in the Unit of Measure parameter. Range is 0
to 4294967295.
Sets the length of media (in meters) that the
printer prints before the Odometer (Printer)
alert is sent. Unit of measurement is defined
in the Unit of Measure parameter. Range is 0
to 4294967295.
Appendix B — Default Settings
Default
Enable
Enable
Enable
Disable
Enable
Enable
Default
0
0
143