Wireless 802.11 Network Settings - Intermec PC23 User Manual

Chapter A —

Wireless 802.11 Network Settings

148
Setting Description
Network Defines the wireless network. To
Name (SSID) communicate, all access points and wireless
devices must have the same network name,
which is case-sensitive.
Network Selects the radio behavior of the printer. Ad
Hoc mode allows the printer to communicate
Type
directly with another printer. Infrastructure
mode allows the printer to commun icate
through an access point.
Roaming Controls the roaming inclination of the
printer. The higher the level, the less inclined
the printer is to switch access points based on
the printer received signal strength (RSSI).
Power Mode Select the power management setting for the
radio. Constant Awake provides the highest
throughput but draws the most power. Power
Saving conserves the most power but
provides the lowest throughput.
Channel Sets the common channel that radios in Ad
Hoc mode use to transfer data. Range is 1 to
14.
Hidden SSID Determines if the radio is allowed to look for
SSIDs that have been hidden to prevent
unauthorized devices from connecting to the
wireless nework.
This section describes the 802.11 IPv4 and IPv6 settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Network > IPv4 or IPv6.
• From the printer home page, click the Configure tab >
Communications > Wireless 802.11.
PC23 and PC43 Desktop Printer User Manual
Default
INTERMEC
Infrastructure
Level 1
Constant
Awake
None
Disable