Error, Information, And Warning Alert Settings - Intermec PC23 User Manual

Chapter 6 —
114
6 Click Error to configure error alerts.
Click Warning to configure warning alerts.
Click Information to configure information alerts.
7 Change alert settings as necessary. When you are finished, click
Save.
To restore default settings for all alerts on the page, click Default
Settings.

Error, Information, and Warning Alert Settings

This section describes error, information, and warning alerts and
settings. To view these settings:
• From the printer home page, click the Configure tab > Alerts >
Error, Warning, or Information.
These alert settings cannot be configured from the printer Main Menu.
Alert settings apply to each of the error, information, or warning alerts
and are configured individually by alert.
Alert Setting Descriptions
Setting Description
Status Determines if an alert is sent out for a specific printer event.
Delay Repeat Sets how often the alert is sent out for a specific printer
event. Range is 1 to 65535.
Delay Unit Selects the unit of measure that determines how often the
alert is sent out.
Message Sets the message that is sent out with each alert for a specific
printer event.
Error Alert Default Settings
Error Alert Status
Out of Media Enable
Out of Ribbon Enable
Delay
Repeat Delay Unit
1 Occurrences
1 Occurrences
PC23 and PC43 Desktop Printer User Manual
Message
Error - Out of media
Error - Out of ribbon