Configure Alerts - Intermec PC23 User Manual

Configure Alerts

PC23 and PC43 Desktop Printer User Manual
• Clean Printhead
• Faulty Dot (Sent when a faulty dot is detected in the printhead,
which can lead to lower print quality)
This section explains how to configure alerts and alert messages. You
configure alert settings from the printer home page.
To configure the printer from its home page, the printer must be
turned on and connected to your Wi-Fi or Ethernet network.
1 On your desktop PC, start a browser.
2 In the Location or Address bar, type the printer IP address and
press Enter. The home page for the printer appears.
3 Click Login in the upper right corner of the screen. The Login page
appears.
4 Type your Username and Password in the entry fields, and then
click Login.
5 Click the Configure tab > Alerts.
Chapter 6 —
113