About Printer Configuration - Intermec PC23 User Manual

Chapter 4 —

About Printer Configuration

Use the Setup Wizard
78
Configuration settings determine how the printer operates. To view
and change printer settings, you can:
• use a browser to view the printer web page through your network
connection. You need to know the printer IP address for this
method.
• use the LCD printer Main Menu.
• use an application such as Intermec PrintSet to communicate with
the printer through a network, serial, or parallel connection.
This section explains how to use the Setup Wizard to configure the
LCD printer. You must configure the printer this way after turning it
on for the first time, after upgrading the firmware, or after resetting all
defaults.
1 Connect the printer to power and press the Power switch. When the
printer is ready, the Setup Wizard starts.
2 Select the settings you want from the menus in the Setup Wizard.
• Use or to select different items in a list.
• If the item you selected requires you to select an option from a
preset list, press or to scroll through the list items.
• Press to select a highlighted item.
• Select and press to continue to the next screen.
PC23 and PC43 Desktop Printer User Manual