Replacing The "Air" Sealing Ring - WAGNER GM 4700AC-H Translation Of The Original Operating Manual

VERSION 09/2011
OPERATING MANUAL
6.6

REPLACING THE "AIR" SEALING RING

Shaping air and atomizer air not separate!
Poor spray pattern
Spray jet cannot be adjusted.
Treat the distributor seal (F) with care.
1. Decommissioning work and cleaning
2. Relieve the pressure of gun and unit.
3. Secure gun with locking device.
4. Unscrew the union nut with nozzle guard (33).
5. Remove air cap (36) and nozzle (13).
6. Remove defective sealing ring (14/F) with the help of pipe tongs or with a large
screwdriver.
7. Assembly: Fit new distributor seal (14/F) to air cap (36).
8. Place air cap, together with sealing ring (14/F), in gun body.
9. Attach union nut (33) and screw in until the sealing ring snaps into place in the
mounting groove (audible snap).
10. Demount union nut (33) and air cap (36) and complete spray gun according to
paragraph 5.4.3.
ORDER NUMBER DOC
CAUTION
1
4
14(F)
2
3
B_02390
2311730
13
36
33
GM 4700AC
32