VERSION 09/2011
OPERATING MANUAL
4
DESCRIPTION
4.1
FIELDS OF APPLICATION, USE IN ACCORDANCE WITH THE INSTRUCTIONS
The gun is suitable for atomizing liquid materials, particularly coating materials, using the
AirCoat process.
4.1.1
PROCESSABLE MATERIALS
Top-coat paints, primer paints, corrosion protection solvents, textured paints, lyes, staining
solvents, clear paints, separating fl uid, etc. on a solvent or water basis. If you want to spray
working materials other than the aforementioned, please contact a Wagner representative.
Hot coating substances!
Burns
Note:
Please contact your local WAGNER dealer and the paint manufacturer if you encounter
application problems.
4.2
SCOPE OF DELIVERY
These AirCoat gun is available in two diff erent variants. The choice of air cap and nozzle are
dependent on application, therefore these components are not included in the scope of
delivery. A selection guide of gun accessories can be found in chapter 8.
4.2.1
VARIANTS FOR APPLICATION RANGE UP TO 25 MPA; 250 BAR; 3625 PSI
Qty
Order No. Description
1
2313585
1
2315700
4.2.2
STANDARD EQUIPMENT
The standard equipment for guns includes:
Qty
Order No.
1
2316429
1
2311729
1
See Chapter 1. Operating manual in local language
1
394335
For special versions the delivery note applies.
ORDER NUMBER DOC
WARNING
Wear antistatic protective gloves.
When operating the unit with a coating material with a
temperature of > 43 °C;109.4 °F: Identify the unit with a warning
label that says „Warning - Hot Surface".
GM 4700AC 25 MPa, NPSM1/4" material connection
GM 4700AC-H 25 MPa, NPSM1/4" material connection
Description
CE Declaration of Conformity
Operating manual German
Spring cap 16 MPa; 160 bar; 2320 psi
2311730
GM 4700AC
12