Cc-Link Ie Field Network Basic Setting - Mitsubishi Electric MELSEC-Q-MR-JE-C Reference Manual

CC-Link IE Field Network Basic setting

This section describes the setting method of the system in which the CC-Link IE Field Network Basic compatible CPU module
(QnUDVCPU) and the MR-JE-C servo amplifier are connected.
1.
Set the IP address of the CPU module (QnUDVCPU).
[Navigation] window  [Parameter]  [PLC Parameter]
Select the "Built-in Ethernet Port Setting" tab on the "Q Parameter Setting" window, and set the IP address.
2 FUNCTION DESCRIPTION
12
2.3 FB Operation