2.
Configure the settings of CC-Link IE Field Network Basic.
[Navigation] window [Parameter] [PLC Parameter]
Select "CC-Link IEF Basic Setting" in the "Built-in Ethernet Port Setting" tab on the "Q Parameter Setting" window.
• Select "Use the CC-Link IEF Basic" on the "CC-Link IEF Basic Setting" window.
• Configure the network setting.
Select "Network Configuration Setting" on the "CC-Link IEF Basic Setting" window.
Add the MR-JE-C.
• Configure the refresh setting.
In the following example, RX and RY are assigned to the device B, and RWw and RWr are assigned to the device W.
2 FUNCTION DESCRIPTION
2.3 FB Operation
2
13