1
OVERVIEW
1.1
Introduction
This function block (FB) library is used in a system in which the CC-Link IE Field Network Basic compatible MELSEC-Q series
QnUDVCPU module and the MR-JE-C servo amplifier are connected.
The FBs included in this library operate in the environment in which the profile mode is set as the control mode of the servo
amplifier MR-JE-C.
For the profile mode setting, refer to the instruction manual of the servo amplifier in use.
1.2
Applicable Hardware and Software
Applicable hardware and software
CPU module
Slave unit
Engineering software
1.3
System Configuration Example
1.4
Relevant Manuals
• MR-JE-_C SERVO AMPLIFIER INSTRUCTION MANUAL [SH030257]
• MR-JE-_C SERVO AMPLIFIER INSTRUCTION MANUAL (CC-Link IE Field Network Basic) [SH030256]
• MR-JE-_C SERVO AMPLIFIER INSTRUCTION MANUAL (PROFILE MODE) [SH030254]
• MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) [SH030166]
• QCPU User's Manual (Hardware Design, Maintenance and Inspection) [SH080483]
• QnUCPU User's Manual (Function Explanation, Program Fundamentals) [SH080807]
• GX Works2 Version1 Operating Manual (Common) [SH080779]
Description
MELSEC-Q series CPU module Q**UDVCPU (First five digits of the serial No. are "18112" or later)
* Q06UDVCPU or later is recommended.
CC-Link IE Field Network Basic compatible MELSERVO-JE servo amplifier MR-JE-C
MELSOFT GX Works2 of version 1.560J or later
1
1 OVERVIEW
3
1.1 Introduction