Advertisement
About this guide
About this guide
Safety information
2
This guide summarizes the operator instructions in the
Guide.
This guide assumes the following:
•
The Labware MiniHub is installed correctly. For installation instructions,
see the
Labware MiniHub Safety and Installation
•
The device profile for the specific Labware MiniHub configuration is
already created and the teachpoints are already set. For setup instructions,
see the
Labware MiniHub User
•
You are familiar with the VWorks Automation Control software. See the
VWorks Automation Control Quick
VWorks Automation Control User
If you are using another lab automation system software, see the user
documentation for that software.
For user information about related products, you can search the product
knowledge base or download the latest version of a PDF file from the Agilent
Technologies website at
WARNING
Using controls, making adjustments, or performing procedures other than
those specified in the user documentation can expose you to moving-parts hazards and
hazardous voltage. Before using the Labware MiniHub, make sure you are aware of the
potential hazards and understand how to avoid being exposed to them.
Before using the Labware MiniHub, your organization should make sure that
you are properly trained in:
•
General laboratory safety
•
The correct and safe operation of the Labware MiniHub
•
The correct and safe operation of lab automation systems or components
used in combination with the Labware MiniHub
For general safety precautions, intended product use statement, and the list of
safety labels, see the
Automation Solutions Products General Safety
For detailed safety information regarding the Labware MiniHub, see the
Labware MiniHub Safety and Installation
Guide.
Start. For detailed instructions, see the
Guide.
www.agilent.com/chem/askb.
Guide.
Labware MiniHub User
Guide.
Guide.
Labware MiniHub Quick Guide
Advertisement
