Agilent Technologies Labware MiniHub Quick Manual page 18

Using MiniHub Diagnostics in the Encore Multispan software
Opening MiniHub Resource Diagnostics
16
3
In the Initialize dialog box, select the MiniHub resource you want to
initialize, and then click Initialize.
Initializing the MiniHub resource from the Run page
To initialize the MiniHub Resource:
1
In the Run tab, make sure the protocol you want to run is open.
2
In the Run group, click Initialize.
Note: The Initialize icon in the Run group changes to reflect the
initialization state of the resources in the workspace:
•
indicates all resources in the workspace are initialized.
•
indicates some of the resources are initialized.
•
indicates none of the resources is initialized.
The Initialize dialog box opens.
3
Select the MiniHub resource you want to initialize, and then. click Initialize.
You can open the Diagnostics dialog box for a resource using either of the
following procedures:
•
"Opening diagnostics from the Setup tab" on page 16
•
Opening diagnostics from the Run tab
Opening diagnostics from the Setup tab
Labware MiniHub Quick Guide