Advertisement
Using Labware MiniHub Diagnostics in the VWorks software
12
2
Click the Jog counterclockwise or Jog clockwise button again to rotate the
MiniHub the specified number of degrees.
Rotating the MiniHub to a specific position relative to home
You can rotate the stage so that cassette 1 is at a specified number of degrees
from the home position, 0°.
To rotate the MiniHub a specific number of degrees:
1
In the Controls tab, type the number of degrees in the Rotate to degree box,
and then click Rotate to degree.
If you specified an angle between 1° and 180°, the software will rotate the
MiniHub clockwise. If you specified an angle greater 180°, the software will
rotate the MiniHub counterclockwise.
Labware MiniHub Quick Guide
Advertisement
