Advertisement
Using MiniHub Diagnostics in the Encore Multispan software
Enabling and disabling the motor
20
Disabling the Labware MiniHub motor allows you to rotate the Labware
MiniHub by hand. You might want to do this when you:
•
Set the home position.
•
Want to remove labware from specific shelves after a run error occurs.
After setting the home position or fixing the error, you can enable the motor
to resume operation.
CAUTION
The MiniHub might rotate slightly when you enable the motor. Obstructing the
MiniHub while it is rotating will cause an error.
To enable or disable the Labware MiniHub motor:
In the MiniHub Resource Diagnostics dialog box, click Enable motor or Disable motor.
When the motor is enabled, the green light next to the button turns on. When
the motor is disabled, the Enabled light turns off.
Labware MiniHub Quick Guide
Advertisement
