Advertisement
Hardware components
Labware MiniHub Quick Guide
The following diagram shows the main components of the Labware MiniHub:
Item
Name
1
Base
2
Shelves
3
Spacers
4
Cassette cap
6
5
4
3
2
1
Description
Gray structure at the bottom of the MiniHub that
attaches the MiniHub to the target surface. The base
contains the power and communication connections
and hosts the indicator lights.
Flat area on which you can place labware. Locating
pins at the edges of the shelves hold the labware
securely in place.
Metal spacing blocks that you can add or remove at the
center of the hub.
Two types of spacers are available:
•
25.1- mm spacers. Stacked between shelves to
accommodate different labware heights.
•
8.4- mm spacers. Stacked above the top- most shelf
to fill the space between the top- most 25.1- mm
spacer and the cassette cap. These spacers ensure
a tight assembly and are only necessary when a
subset of the shelves are used.
Metal label with numerical identification of each
cassette. The numbers are used in Labware MiniHub
Diagnostics and in VWorks software.
Hardware components
3
Advertisement
