Status Monitor Does Not Start - Canon CX-G6400 User Manual

Status Monitor Does Not Start

Check Point
The Status Monitor setting is
incorrect.
Check whether the printer and
computer can communicate
interactively.
Important
• If you have changed the paper, hold the tray switch lever
as shown in the drawing and change the setting to "1
(Standard)". Incorrect settings may result in paper transport
problems.
Solution
With some Status Monitor settings, printer errors will not be
displayed and the Status Monitor will not start. Open the [Utility]
tab of the printer driver, and click [Start Status Monitor]. Set the
details after the Status Monitor starts.
If the printer and computer cannot communicate interactively, the
Status Monitor will not start even if printing starts.
Open [Properties] of the printer driver, click [Port] tab, and then
verify that [Enable bidirectional support] check box is checked.
If the problem persists after taking the above action, uninstall the
printer driver, and then reinstall the printer driver.
For Troubleshooting Operations
P.107
（→ ）
169