Canon CX-G6400 User Manual page 172

Chapter 6 Troubleshooting
Check Point
If the above solutions do not
solve the problem.
168
Solution
Try the following steps.
(Solution 1)
1. Create the paper size whose form is set to [Thick paper] using
[Custom paper size].
（→
2. Set the paper size created in step 1.
3. Print again.
If the problem is still not resolved, try Solution 2.
(Solution 2)
1. If the Feeder Lift Tray is lowered, press the TRAY key.
2. Lower the tray switch lever as shown in the drawing and set [2].
P.4
（→ ）
3. Print again.
P.48
）