Switching The Printer To The Sleep State - Canon CX-G6400 User Manual

Chapter 3 How to Use the Printer Driver

Switching the Printer to the Sleep State

Switch the printer to the sleep state (power saving state).
Important
• When printing is in progress or an error has occurred, the printer cannot be switched to the sleep
state.
• The printer enters the sleep mode automatically when it has been left idle for a certain period of
time under normal conditions of operation.
Note
• By default, the sleep timer is set to 4 minutes.
• The printer is automatically switched back from the sleep state to the online state in the following
cases:
– When the Power key is pressed.
– When print data is received.
– When cleaning, etc. is performed.
1
Make sure the printer is in the online state (the status lamp is lit).
2
Open the printer driver setup window.
90
P.36
（ → ）