Paper Is Not Feeding Correctly - Canon CX-G6400 User Manual

Paper is Not Feeding Correctly

Check Point
Is the dedicated paper being
used?
Is the paper leading edge
folded or is the paper curled?
Is the side guide set in
accordance with the paper
width?
Is the tray switch lever set to "1
(Standard)"?
Is the maximum number
of sheets that can be set
exceeded?
Is the transport area stained?
Is there any paper dust stuck to
the pick-up rollers?
Solution
Use dedicated paper.
Using paper other than dedicated paper can cause paper jams
and malfunctions.
Fix the curl so that the paper is flat.
If the paper leading edge is folded or curled, the paper will not
feed properly. Also, it can cause paper jams and malfunctions.
Reload the paper.
Set the side guide in accordance with the paper width.
Use in the "1 (Standard)" position. Normally, this does not need to
be changed.
Incorrect settings may result in paper transport problems.
Check the maximum number of sheets.
If the transport area is stained with paper dust or ink, paper jams
are more likely to occur. Clean the transport area regularly.
If there is paper dust stuck to the rollers, paper feed may not
function properly. Clean the pick-up roller.
For Troubleshooting Operations
P.17
（→ ）
P.19
（→ ）
P.157
（→
P.23
（→ ）
P.169
（→ ）
P.154
（→ ）
）
167