Printer Does Not Start Or Stops During Print Jobs - Canon PIXMA iP6220D Series Quick Start Manual

Troubleshooting
Printer Does Not Start or Stops During Print Jobs
Problem
I
Possible Cause
I
Try This
Printer Does Not There may be Restart your computer. It may solve the problem.
Start or Printer problems with your
Delete an undesired print job, if there is any. Use Canon
IJ
Status Monitor in
Stops During operating system
Windows or Printer Setup Utility (or Print Center) in Macintosh for the deletion.
Print Jobs
'Y4~
1. Open the printer properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu"
on page 16.
2. Click the Maintenance tab and then View Printer Status.
3. Click Display Print Queue.
4. Select Cancel All Documents in the Printer menu.
W
Note
In Windows XP and Windows
2000
The print jobs may not be selected.
5. When the confirmation message is displayed, click Yes.
The print job is deleted.
W
Note In Windows Me and Windows 98
Click to select an undesired document and select Purge Print
Documents in the Printer menu.
J"\/""L
S~
1. Select Applications from the Go menu.
2. Double-click the Printer Setup Utility icon in the Utilities folder.
When using Mac
as x
v.l 0.2, double-click the Print Center icon.
3. Double-click the name of your printer displayed under Name in the Printer List.
4. Click to select an undesired document and click
The print job is deleted.
Cannot Print to Incorrect page size Ensure that the page size setting matches the size of the paper loaded in the
End of Job is selected printer:
•
Check the Page Size setting from within your application to ensure that it
matches the size of the paper loaded.
• Check Page Size on the Page Setup tab in the printer properties dialog box of
the printer driver (Windows) or the Page Setup dialog box of the printer driver
(Macintosh) to ensure that it matches the size of the paper loaded.
r4'Jrmmm
Check the size of the print data. For Windows XP and Windows 2000, if the size of
The size of the print
the data is too large, part of it may be lost. When the spool format is EMF, follow
data is too large
the procedure below.
1. Open the printer properties dialog box.
2. On the Page Setup tab, click Print Options.
3. Select the Reduce spool data size check box, and click OK.
W
Note
When Reduce spool data size is set, the print quality may be
degraded.
25