Canon CX-G6400 User Manual page 127

7
[Step 2] Check the reference position.
Check whether the black frame is centered on the paper.
Normally, this frame border is drawn 2.0 mm (0.08 inch) above the top end of the paper and 2.0
mm (0.08 inch) from the leftmost end. Adjust the reference position only when it is deviated
significantly.
Adjusting the Reference Position
■
• Vertical adjustment:
If the black frame is shifted upward, specify a
negative (-) value. If the black frame is shifted
downward, specify a positive (+) value.
Click the radio button (A) and then specify the
adjustment value.
• Horizontal adjustment:
If the black frame is shifted leftward, specify a
positive (+) value. If the black frame is shifted
rightward, specify a negative (-) value.
Click the radio button (W) and then specify the
adjustment value.
Note
• A value can be entered in the text box.
• Click the
• Changing the value by 1 will move the black frame 0.0212 mm (0.0008 inch) upward/
downward/leftward/rightward.
• The vertical adjustment range is from -32 to +32, and the horizontal adjustment range is from
-30 to +30. However, the adjustment range may be limited depending on the current setting.
Specify the adjustment value between
and buttons to increase or decrease the current value by one.
Adjusting Print Head Position
and shown on the slider scale.
▲ ▼
123