Cisco Nexus 7706 Hardware Installation Manual page 14

Overview of the Cisco Nexus 7706 Switch Installation Features
1 Chassis LEDs
2 Chassis mounting brackets (one on each
side of the chassis behind the cable
management frames)
3 Cable management frame (2)
4 I/O modules (1–4) in Slots 1,2,5,6
The following figure shows the standard hardware features seen from the rear of the chassis.
Cisco Nexus 7706 Hardware Installation Guide
2
• 48-port 1/10-Gigabit Ethernet I/O
module (N77-F248XP-23E)
• 12-port 100-Gigabit Ethernet I/O
module (N77-F312CK-26)
• 24-port 40-Gigabit Ethernet I/O
module (N77-F324FQ-25)
• 48-port 1- and 10-Gigabit Ethernet
I/O module (N77-F348XP-23)
• 12-port 100-Gigabit Ethernet I/O
module (N77-M312CQ-26L)
• 24-port 40-Gigabit Ethernet I/O
module (N77-M324FQ-25L)
• 48-port 1- and 10-Gigabit Ethernet
I/O module (N77-M348XP-23L)
5 Supervisor modules (one or two) (N77-SUP2E and
N77-SUP3E) in Slots 3, 4
6 Power supplies (up to 4)
• 3-kW AC power supply (N77-AC-3KW)
• 3-kW DC power supply (N77-DC-3KW)
• 3.5-kW HVAC/HVDC power supply
(N77-HV-3.5KW)
7 Chassis handles (used only for small movements
on the rack)
Overview
OL-31330-01