Table of Contents
Advertisement
10BASE-DWDM SFP+ Transceiver Specifications
Parameter
Storage temperature
Operating temperature
Case temperature
Module supply voltage
10BASE-DWDM SFP+ Transceiver Specifications
The Dense Wavelength Division Multiplexing (DWDM) SFP+ transceivers are part of a DWDM optical
network to provide high-capacity bandwidth across a fiber-optic network. There are 32 fixed-wavelength
DWDM SFP+ transceivers that support the International Telecommunications Union (ITU) 100-GHz
wavelength grid. These transceivers have duplex SC connectors. DWDM SFP+ transceivers can transmit and
receive optical signals up to 50 miles (80 km) depending on the quality of the fiber-optic cable used.
DWDM SFP+ transceivers look like the typical 10GBASE-X SFP+ transceivers as shown in the following
figure.
Figure 37:
1
2
3
For the Cisco DWDM SFP+ transceiver cable specifications, see the following table.
Cisco Nexus 7706 Hardware Installation Guide
134
Specification
–40 to 185°F (–40 to 85°C)
32 to 158°F (0 to 70°C)
–40 to 158°F (–40 to 70°C)
3.1 to 3.5 V
Receive optical bore
Transmit optical bore
Clasp shown in closed position
4
Clasp shown in open position
5
Dust plug
Switch Specifications
OL-31330-01
Advertisement
Table of Contents
