40-Gb Qsfp+ Transceiver Specifications - Cisco Nexus 7706 Hardware Installation Manual

40-Gb QSFP+ Transceiver Specifications

Parameter
Storage temperature
Operating temperature
Case temperature
Storage relative humidity
40-Gb QSFP+ Transceiver Specifications
Note
The 40-Gigabit QSFP+ transceivers are used with the F3-Series 40-Gigabit I/O modules (N77-F324FQ-25)
, M3-Series 40-Gigabit I/O modules (N77-M324FQ-25L) and the M3-Series 100-Gigabit I/O modules
(N77-M312CQ-26L).
The following figure identifies the major features of these transceivers.
Figure 35:
1
For the cable specifications that apply to these transceivers, see the following table.
Transceiver
FET-40G
Note FET-40G is not
supported with
N77-M324FQ-25L
and
N77-M312CQ-26L.
QSFP-H40G-ACUxM
Cisco Nexus 7706 Hardware Installation Guide
128
Specification
–40 to 185°F (–40 to 85°C)
32 to 158°F (0 to 70°C)
–40 to 158°F (–40 to 70°C)
5 to 95 percent
Optical bore
Cable Connector Type
Type
MMF QSFP+ to QSFP+
Direct QSFP+ to QSFP+
attach
copper,
active
2 Pull tab
Wavelength Core Size
(nm) (microns)
850 50.0
50.0
50.0
— —
Switch Specifications
Modal Maximum Cable
Bandwidth Distance
(MHz-km)
500 98 feet (30 m)
2000 328 feet (100 m)
4700 328 feet (100 m)
— 23 feet (7 m)
33 feet (10 m)
OL-31330-01