Cisco Nexus 7706 Hardware Installation Manual page 175

LEDs
LED
Status
Link (for
each port)
OL-31330-01
Color Status
Green All diagnostics passed. This module is operational (normal
initialization sequence).
Amber Indicates one of the following:
• The module is booting or running diagnostics.
• An overtemperature condition has occurred. (A minor
Flashing red Indicates one of the following:
• The switch has just been powered on, and the module is resetting.
• The module has been inserted during the initialization process.
• An overtemperature condition has occurred. A major temperature
• The module has failed to download code and configuration
Red Indicates one of the following:
• The module has detected a slot ID parity error and will not power
• The module is not fully inserted, and it is not making a reliable
Off The module is not receiving power.
The port is active (the link is connected and active).
Green
Amber The module or port is disabled by using a CLI command or the
module is initializing.
Flashing amber The port is faulty and disabled.
Off The port is not active or the link is not connected.
temperature threshold has been exceeded during environmental
monitoring.)
threshold has been exceeded during environmental monitoring
information successfully during the initial reset. The module is
not online.
on or boot up.
connection with the supervisor.
Cisco Nexus 7706 Hardware Installation Guide
LEDs
163