Managing The Switch; Displaying Information About Installed Hardware Modules - Cisco Nexus 7706 Hardware Installation Manual

Managing the Switch

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Displaying Information About Installed Hardware Modules

To display information about the switch hardware and the hardware modules installed in the switch chassis,
use the show hardware command.
Enter the show hardware command.
Example:
show hardware
switch#
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_seri
es_home.html
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
OL-31330-01
Displaying Information About Installed Hardware Modules, on page 51
Displaying the Hardware Inventory for a Switch, on page 54
Displaying the Backplane and Serial Number Information, on page 55
Displaying Environmental Information for a Switch, on page 57
Displaying Temperatures for Modules, on page 60
Connecting to a Module, on page 62
Saving the Module Configuration, on page 63
Displaying Power Usage Information, on page 63
Reloading a Module, on page 64
Rebooting the Switch, on page 64
Overview of Supervisor Modules, on page 65
Overview of I/O Module Support, on page 65
Overview of Fabric Module Support, on page 71
Power Modes Overview, on page 73
Overview of Fan Trays, on page 77
5
C H A P T E R
Cisco Nexus 7706 Hardware Installation Guide
51