Changing Your Program In Run Mode - Siemens S7-1200 System Manual

14.12.2

Changing your program in RUN mode

To change the program in RUN mode, your must first ensure that the CPU and program
meet the prerequisites (Page 804), and then follow these steps:
1. To download your program in RUN mode, select one of the following methods:
2. When STEP 7 prompts you to load your program or cancel the operation, click "Load" to
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
– Select the "Download to device" command from the "Online" menu.
– Click the "Download to device" button in the toolbar.
– In the "Project tree", right-click "Program blocks" and select the "Download to device >
Software" command.
If the program compiles successfully, STEP 7 starts to download the program to the CPU.
download the program to the CPU.
Online and diagnostic tools
14.12 Downloading in RUN mode
805