Siemens S7-1200 System Manual page 375

Parameter and type
ERROR OUT
STATUS OUT
Table 8- 154 Values of ERROR and STATUS
ERROR STATUS
(W#16#....)
0 0000
0 7000
0 7001
0 7002
1 8070
1 8090
1 8091
1 8092
1 80B3
1 80B4
1 80B6
1 80C0
1 80C1
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
Data type Description
Bool The ERROR bit is TRUE for one scan, after the last request was
terminated with an error. The error code value at the STATUS
parameter is valid only during the single scan where ERROR =
TRUE.
0: No warning or error
•
1: An error has occurred. The STATUS parameter provides
•
information on the type of error.
Word Execution condition code
Description
No error
Call with no REQ edge: BUSY = 0, DONE = 0
First call with REQ edge (working): BUSY = 1, DONE = 0
N call (working): BUSY = 1, DONE = 0
th
All instance memory is in use.
File name contains invalid characters
The data structure referenced with RECIPE_DB cannot be processed.
Data structure specified in RECIPE_DB exceeds 5000 bytes
Not enough space in on MC or in internal load memory
MC is write protected
Recipe DB attribute "Only store in load memory" is not enabled.
CSV file is temporarily locked
DB is temporarily locked
Extended instructions
8.7 Recipes and Data logs
375